295/40R22 tire size
A 295/40R22 tire stands 31.3 inches tall and 11.6 inches wide, with a 4.6-inch sidewall on a 22-inch rim.
- Overall height
- 31.3 in795 mm
- Section width
- 11.6 in295 mm
- Sidewall height
- 4.6 in118 mm
- Rim diameter
- 22 in559 mm
- Circumference
- 98.3 in2497 mm
- Revolutions per mile
- 645400 per km
- Inch size
- 31.3x11.6R22
Compare it with any other size in the tire size calculator.
Sizes you can swap to
These 22-inch sizes are within two width steps and 3% of a 295/40R22's overall height, the usual limit before the speedometer, ABS and transmission notice. The closest is 285/40R22, 1.0% shorter (0.31 in). Wider sizes also need room in the wheel well and a rim width that suits them.
Plus and minus sizes
Changing rim size means changing the sidewall to keep the same overall height. On 20-inch or 21-inch or 24-inch rims, these are the closest matches to a 295/40R22.
Other 22-inch sizes near 295/40R22
295 mm wide, other sidewalls
40 series, other widths
See the other sizes for this rim on 22-inch tire sizes, or other tires about this tall on 31-inch tires.
Shop 295/40R22 tires
These open each store's own list of 295/40R22 tires, where you can filter by type, load and speed rating.
295/40R22 questions
How tall is a 295/40R22 tire?
About 31.3 inches (795 mm) from the ground to the top of the tread, unloaded. On the vehicle, carrying weight, it sits a little lower.
What does 295/40R22 mean?
295 is the section width in millimetres (11.6 in). 40 means the sidewall is 40% of that width: 118 mm, or 4.6 in. R means radial construction, and 22 is the rim diameter in inches.
Can I use 285/40R22 instead of 295/40R22?
285/40R22 is 1.0% shorter (0.31 in) and 10 mm narrower, which is inside the usual 3% rule. With it fitted, the speedometer shows 60 mph when you are doing 59.4 mph.
What is 295/40R22 in inches?
In inch terms it is 31.3x11.6R22: 31.3 inches tall, 11.6 inches wide, for a 22-inch rim.
How many revolutions per mile does a 295/40R22 make?
About 645 turns per mile, worked out from its unloaded circumference of 98.3 inches. Makers list slightly higher numbers for their own tires, because a loaded tire rolls on a smaller radius.