My Tire Guide

295/35R20 tire size

A 295/35R20 tire stands 28.1 inches tall and 11.6 inches wide, with a 4.1-inch sidewall on a 20-inch rim.

28.1″OVERALL 28.1 IN · RIM 20 IN11.6″4.1″WIDTH · SIDEWALL
Overall height
28.1 in715 mm
Section width
11.6 in295 mm
Sidewall height
4.1 in103 mm
Rim diameter
20 in508 mm
Circumference
88.4 in2245 mm
Revolutions per mile
717446 per km
Inch size
28.1x11.6R20

Compare it with any other size in the tire size calculator.

Sizes you can swap to

These 20-inch sizes are within two width steps and 3% of a 295/35R20's overall height, the usual limit before the speedometer, ABS and transmission notice. The closest is 285/35R20, 1.0% shorter (0.28 in). Wider sizes also need room in the wheel well and a rim width that suits them.

SizeHeightWidthAt 60 mph
285/35R20−1.0%−0.28 in−10 mm59.4 mph
305/35R20+1.0%+0.28 in+10 mm60.6 mph
275/40R20+1.9%+0.53 in−20 mm61.1 mph
275/35R20−2.0%−0.55 in−20 mm58.8 mph
315/35R20+2.0%+0.55 in+20 mm61.2 mph

Plus and minus sizes

Changing rim size means changing the sidewall to keep the same overall height. On 18-inch or 19-inch or 21-inch rims, these are the closest matches to a 295/35R20.

SizeHeightWidthAt 60 mph
285/45R18−0.1%−0.03 in−10 mm59.9 mph
285/40R19−0.5%−0.15 in−10 mm59.7 mph
305/30R21+0.3%+0.07 in+10 mm60.2 mph

Other 20-inch sizes near 295/35R20

295 mm wide, other sidewalls

35 series, other widths

See the other sizes for this rim on 20-inch tire sizes.

Shop 295/35R20 tires

These open each store's own list of 295/35R20 tires, where you can filter by type, load and speed rating.

295/35R20 questions

How tall is a 295/35R20 tire?

About 28.1 inches (715 mm) from the ground to the top of the tread, unloaded. On the vehicle, carrying weight, it sits a little lower.

What does 295/35R20 mean?

295 is the section width in millimetres (11.6 in). 35 means the sidewall is 35% of that width: 103 mm, or 4.1 in. R means radial construction, and 20 is the rim diameter in inches.

Can I use 285/35R20 instead of 295/35R20?

285/35R20 is 1.0% shorter (0.28 in) and 10 mm narrower, which is inside the usual 3% rule. With it fitted, the speedometer shows 60 mph when you are doing 59.4 mph.

What is 295/35R20 in inches?

In inch terms it is 28.1x11.6R20: 28.1 inches tall, 11.6 inches wide, for a 20-inch rim.

How many revolutions per mile does a 295/35R20 make?

About 717 turns per mile, worked out from its unloaded circumference of 88.4 inches. Makers list slightly higher numbers for their own tires, because a loaded tire rolls on a smaller radius.