295/60R20 tire size
A 295/60R20 tire stands 33.9 inches tall and 11.6 inches wide, with a 7.0-inch sidewall on a 20-inch rim.
- Overall height
- 33.9 in862 mm
- Section width
- 11.6 in295 mm
- Sidewall height
- 7.0 in177 mm
- Rim diameter
- 20 in508 mm
- Circumference
- 106.6 in2708 mm
- Revolutions per mile
- 594369 per km
- Inch size
- 33.9x11.6R20
Compare it with any other size in the tire size calculator.
Sizes you can swap to
These 20-inch sizes are within two width steps and 3% of a 295/60R20's overall height, the usual limit before the speedometer, ABS and transmission notice. The closest is 275/65R20, 0.4% taller (0.14 in). Wider sizes also need room in the wheel well and a rim width that suits them.
Plus and minus sizes
Changing rim size means changing the sidewall to keep the same overall height. On 18-inch or 19-inch or 21-inch or 22-inch rims, these are the closest matches to a 295/60R20.
295/60R20 compared
LT295/60R20
LT295/60R20 is the light-truck version of this size, with the same nominal height and width: 33.9 by 11.6 inches. LT tires have stiffer construction for heavier loads and towing, run at higher pressures and carry a load range (C, D, E or F) instead of a passenger load rating. Fit LT tires where the door placard calls for them or the truck works hard; on a light-duty vehicle they ride firmer than the P-metric size.
Other 20-inch sizes near 295/60R20
295 mm wide, other sidewalls
60 series, other widths
See the other sizes for this rim on 20-inch tire sizes.
Shop 295/60R20 tires
These open each store's own list of 295/60R20 tires, where you can filter by type, load and speed rating.
295/60R20 questions
How tall is a 295/60R20 tire?
About 33.9 inches (862 mm) from the ground to the top of the tread, unloaded. On the vehicle, carrying weight, it sits a little lower.
What does 295/60R20 mean?
295 is the section width in millimetres (11.6 in). 60 means the sidewall is 60% of that width: 177 mm, or 7.0 in. R means radial construction, and 20 is the rim diameter in inches.
Is LT295/60R20 the same size as 295/60R20?
Yes, they share the same nominal size: 33.9 inches tall and 11.6 inches wide. The difference is construction. LT tires are built for heavier loads at higher pressures and carry a load range letter (C, D, E or F); they ride firmer than passenger tires.
Can I use 275/65R20 instead of 295/60R20?
275/65R20 is 0.4% taller (0.14 in) and 20 mm narrower, which is inside the usual 3% rule. With it fitted, the speedometer shows 60 mph when you are doing 60.2 mph.
What is 295/60R20 in inches?
In inch terms it is 33.9x11.6R20: 33.9 inches tall, 11.6 inches wide, for a 20-inch rim.
How many revolutions per mile does a 295/60R20 make?
About 594 turns per mile, worked out from its unloaded circumference of 106.6 inches. Makers list slightly higher numbers for their own tires, because a loaded tire rolls on a smaller radius.